How to Check and Change Your Wiper Blades from Acura Carland In Duluth, GA

It is easy to forget about how important windshield wipers are until they are already well past their prime, but great wiper blades are vital to driver visibility during rough weather. Old or faulty windshield wipers can lead to dangerously low visibility.

Drivers should be aware that wiper blades are made of rubber, which can wear even with limited use. Because of this fact, wiper blades should be examined every 6-12 months to ensure that they are still in good shape. Blades that are torn, cracked, or heavily worn may not grip the windshield properly and struggle to remove mud, rain, sleet, or snow from your eyeline. Keep in mind that weather conditions and vehicles vary and your windshield wipers may need to be inspected more frequently.

When it is time to replace your wiper blades, the task can be relatively simple, however if you are not confident in your skills, the professionals at Acura Carland in Duluth, GA would be happy to provide any assistance you may require. To replace your wipers yourself, follow these steps:

1. Measure - the wiper blades’ length or check your car’s owner's manual for the correct blade size

2. Remove the old wipers - Lift the wiper arm away from the windshield and depress the small tab on the underside of the wiper where it meets the wiper arm. When the tab is depressed, slide the wiper blade off the arm by pulling downward.

3. Attach the new wiper - Pull the wiper blade tight onto the arm. You will hear a clicking sound when it locks into place. Now, simply lower the arm slowly back onto the windshield and repeat with the other wiper arm.

4. Test - the wiper blades after instillation. Better to find any issues at this point, while you are poised to correct them than to wait for the next downpour.